# Can I pause my project, come back later and build version 2?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

Type close and press "Send". Later, press "Main menu", choose "Choose an agent", choose Kai-Zen, type what version 2 needs, and press "Send".

## Before you start

You need [a project Kai-Zen set up for you](http://support.gilb.com/help/how-do-i-start-work-with-kai-zen), and your own AI, Claude Code or Grok, [connected in GilbApp's chat](http://support.gilb.com/help/how-do-i-connect-my-ai-to-gilbapp-chat). Step 1 needs [a session with Kai-Zen open in the chat](http://support.gilb.com/help/how-do-i-chat-with-an-agent-in-gilbapp). The pictures show a made-up person on a test site; your screen shows your own name and address.

## Steps

1. Type close in "Write a message…" and press "Send".

   With Kai-Zen chosen in the chat, type close in the box that shows "Write a message…" and press "Send". Wait until Kai-Zen's last message says what is left open and that you can close the session.

   While closing, Kai-Zen finishes or stops the work in hand and says what is not done. It saves everything the session wrote where the project is kept. It puts live what is ready to be live but is not; before that it always stops and asks you. Last, it writes a handoff for the next session, saved with the project. The answer [How do I end a session?](http://support.gilb.com/help/how-do-i-end-a-session) shows the same.

   ![GilbApp with the word close typed in a chat with Kai-Zen; "Send" to the right of the message box is outlined in orange.](http://support.gilb.com/help/media/0f9c3cc164102f98.png)
   What you see: The chat is on the left of the screen, and the agent list at its top reads "Kai-Zen - Master Agent of Planning". At the bottom left, close is typed in the message box. Press "Send", outlined in orange, to the right of that box.
2. When you come back, press "Main menu" at the top left and choose "Choose an agent".

   Press "Main menu", next to your profile picture at the top left, and under "FOR YOU" choose "Choose an agent" \("Pick or connect an AI agent."\). GilbApp opens the left pane, where you chat, and puts the cursor on the agent list at the top of it.

   The button shows the name of the section you are in, such as "Vaults". The square button at the far left of the top bar also shows or hides the left pane. If you come back on another day, [sign in to GilbApp](http://support.gilb.com/help/how-do-i-sign-in-to-gilbapp) first, and [connect your AI again](http://support.gilb.com/help/how-do-i-connect-my-ai-to-gilbapp-chat) if the chat shows "Connect".

   ![GilbApp with the "GO TO" panel open; "Choose an agent" under "FOR YOU" is outlined in orange.](http://support.gilb.com/help/media/0a06019675b83e99.png)
   What you see: Top left, the button next to your profile picture is open, and the "GO TO" panel fills the screen. In the right column, under "FOR YOU", the row "Choose an agent" \("Pick or connect an AI agent."\) has the orange outline. Click it.
3. Choose "Kai-Zen - Master Agent of Planning" in the agent list.

   Press the agent list at the top of the left pane and choose "Kai-Zen - Master Agent of Planning". Each agent has its own chat, and the list shows which one you are in.

   A new chat starts on the first agent in the list, "Jackfruit - Master Agent of Vaults and Information". The list comes from GilbPlatform each time the chat opens. GilbApp keeps your choice for this browser tab. While an agent is answering, the list is greyed out.

   ![GilbApp with the chat open in the left pane; the agent list at its top, showing "Jackfruit - Master Agent of Vaults and Information", is outlined in orange.](http://support.gilb.com/help/media/6fbd3194c9059be5.png)
   What you see: The chat pane is now open on the left. At its top, the agent list has the orange outline; it still shows "Jackfruit - Master Agent of Vaults and Information", the first agent. Click the list and pick "Kai-Zen - Master Agent of Planning".
4. Type the project and what version 2 should do in "Write a message…" and press "Send".

   In "Write a message…", name the project's vault and say what version 2 should do, then press "Send". Kai-Zen reads the project first and then asks what only you know in one message.

   Return also sends; Shift and Return starts a new line. You can ask for changes you name, new things your app must do, planning again, or the next step to be built; to see first how far the project came, ask where it stands. While it works, the pane says "The agent is writing…", then "Ran" and the name of each tool it uses, and "Send" reads "Queue". The answer [How do I answer Kai-Zen's questions?](http://support.gilb.com/help/how-do-i-answer-kai-zens-questions) shows how to reply. For example:
   Project in vault plantswap: where does it stand? Then plan version 2: members can also swap cuttings, and see a list of what others offer.

   ![GilbApp with a message about a project's version 2 typed in the box at the bottom of the chat with Kai-Zen; "Send" to the right of it is outlined in orange.](http://support.gilb.com/help/media/b7860583ab78451d.png)
   What you see: The list at the top of the left pane now shows "Kai-Zen - Master Agent of Planning". At the bottom, the message box holds a message that names a vault, asks where its project stands and says what version 2 should do. Press "Send", outlined in orange, to the right of the box.

## Deeper

Yes. You can stop at any time and come back later; your project waits where it is kept. Kai-Zen, the planning agent, picks it up from there.

Where everything is kept while you are away. Kai-Zen keeps each project's files, its plan, its set-up record, its reports and its handoffs, in the project's own folder: its vault, a folder on your computer, or both, as you chose when the project started. A vault is a place on GilbPlatform where records are kept, and one vault holds one project. A handoff is the note Kai-Zen writes when you end a session: what was done, what is open and where to start next time. Your app's code stays in the folder on your computer where your AI builds it, and, once building has started, in its copy on GitHub, a website where programmers keep code; the answer [Where does all the code go, and can I get a copy of it?](http://support.gilb.com/help/where-does-all-the-code-go-and-can-i-get-a-copy-of-it) tells more. Closing a session takes nothing off the internet: Kai-Zen's close puts live what is ready, with your yes, and takes nothing down. Pausing does not take a live app off the internet: it stays at its address. The chat itself is not kept: GilbApp keeps it in this browser tab only, so a closed tab loses the chat, not the project.

You do not have to close before you stop; what was saved stays, as the answer [I stopped in the middle. Where do I continue?](http://support.gilb.com/help/i-stopped-in-the-middle-where-do-i-continue) shows. Closing is safer, because Kai-Zen then saves everything and writes the handoff.

Coming back. Kai-Zen reads the project before it does anything: its setup, its plan and its last round of work. It does not ask again what you already answered. If you do not say where the project is kept, it looks for it in the vaults you can reach; if several fit, it asks which one. If your app has changed since a goal was last measured, Kai-Zen has it measured again before it leans on it; a goal here is a goal for how well your app must do something.

Version 2. GilbApp has no control for a new version, and the standards have no separate version 2: you tell Kai-Zen what you want next, in your own words, and it goes on with the same project, in the same vault. You can ask for one or more of these, and Kai-Zen does them in this order: a change to the app you name, such as a new button; something new or changed your app must do or how well; planning again; having the next step built; where the project stands. New wishes are added to the plan, and the plan is made more exact. The steps Kai-Zen suggested earlier are only a forecast: it picks each step just before it is built, from what is true today, and starts with what gives the most for the least effort. Each step is then built, checked, tested and put live as before, and nothing goes live without your yes. The answers [How do I change the product while a project runs?](http://support.gilb.com/help/how-do-i-change-the-product-while-a-project-runs) and [How does Kai-Zen run a whole delivery cycle?](http://support.gilb.com/help/how-does-kai-zen-run-a-whole-delivery-cycle) tell more.

Version 2 of the same app goes live at the same address and uses no new site; the answer [How do I update my app after it is live?](http://support.gilb.com/help/how-do-i-update-my-app-after-it-is-live) shows how. A very different app is a new project in its own vault; see [Can I make a second app from the same plan or code?](http://support.gilb.com/help/can-i-make-a-second-app-from-the-same-plan-or-code)

An idea for later, without starting work, can be kept by Kai-Zen; the answer [How do I keep an idea for later?](http://support.gilb.com/help/how-do-i-keep-an-idea-for-later) shows how.

In Claude Code in Terminal, the window where you type commands, you can do the same. Type close to pause. To come back, start Claude Code, type this line with your own short name, the one you gave your AI when you [connected your computer](http://support.gilb.com/help/how-do-i-connect-my-computer-to-my-vault), and press Return:
/mcp\_\_gilb-&lt;short name\>\_\_agent
Then say which project and what version 2 should do, and press Return.

This answer is written for a computer screen.

Source: Kai-Zen standards: Kai-Zen.Close \(Finish, Git, Deploy, Handoff, Tell; no step takes anything off the internet\); Kai-Zen.ProjectRules \(Files, Vault: one vault holds one project\); Kai-Zen.Existing \(Read: finds the project in the vaults the requester can reach, asks if several fit, reads setup, specs and last cycle; Evaluate: the order of the five kinds of request; Update; Change; Replan; Deliver; Report\); Kai-Zen.AskRules \(One, Settled\); Kai-Zen.EvidenceRules.Fresh; Kai-Zen.ValueDeliveryStepRules \(Question, Forecast, Today\); Kai-Zen.Cycle; Kai-Zen.GoLive; Kai-Zen.Idea. GilbApp 49b1ae53 \(https://gilb.com/app/version.json, read 13 November 2026\): src/components/menu/sectionMenuList.ts:330 \("Choose an agent", "Pick or connect an AI agent."\); src/components/agent/AgentSelector.tsx:15-17 \(the list shows name - description\), :56-86 \(the list\); src/components/agent/AgentChat.tsx:1406 \("Write a message…"\), :1423 \("Send", "Queue"\), :1038 \("Connect"\), :716 \("The agent is writing…"\), :83 \(32 messages kept\), :1-5 \(the chat stays in this tab\). GilbPlatform agent list \(https://id.gilb.com/base/ai/agents, read 13 November 2026\): "Jackfruit" "Master Agent of Vaults and Information" first, "Kai-Zen" "Master Agent of Planning". Live help pages, sentences shared: How do I continue a project with Kai-Zen?; How do I end a session?; I stopped in the middle. Where do I continue?; Where is what I tell Kai-Zen written down, and where is my plan kept?; Where does all the code go, and can I get a copy of it?; How do I change the product while a project runs?; How does Kai-Zen run a whole delivery cycle?; How do I update my app after it is live?; How do I keep an idea for later?; How do I answer Kai-Zen's questions?
