# How do I add a person's addresses and time zone?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

In "Stakeholders", search and select the person, press "+ Add Information", choose "Postal Address" or "Time zone", and type it or search and select it.

## Before you start

You need to be [signed in to GilbApp](http://support.gilb.com/help/how-do-i-sign-in-to-gilbapp) on a computer, with the person's card in a vault you can write to, such as [your own vault](http://support.gilb.com/help/how-do-i-create-my-first-vault). [The answer on adding a person as a stakeholder](http://support.gilb.com/help/how-do-i-add-a-person-as-a-stakeholder) shows how to make one. The pictures show a made-up person on a test site; your screen shows your own name and address.

## Steps

1. Press "Main menu" at the top left and choose "Stakeholders".

   Press "Main menu", next to your profile picture at the top left, and under "YOUR SECTIONS" choose "Stakeholders". A stakeholder is a person, group or system that cares whether a Value goes up or down.

   The button shows the name of the section you are in, such as "Vaults". A panel headed "GO TO" opens; "Stakeholders" reads "The people and organisations you deal with." You can also press the "Stakeholders" button on the card of a vault \(the place where a person or a group keeps their records\) in "Vaults". The screen lists your stakeholders and has the views "Grid", "Graph", "Both" and "Card". The list also holds organisations, systems and groups; the "TYPE" column says which are "Person".

   ![GilbApp with the "GO TO" panel open, and "Stakeholders" under "YOUR SECTIONS" outlined in orange.](http://support.gilb.com/help/media/fa2bc7ecd17c992c.png)
   What you see: At the top left, press "Main menu" \(it shows the name of the section you are in\). In the panel headed "GO TO", look under "YOUR SECTIONS" and press "Stakeholders", "The people and organisations you deal with.", outlined in orange.
2. Search and select the person in the list.

   Type a word of the person's name in the search box marked "RECORDS" above the list, and click the person in the list. The person's card opens in the middle of the screen, and the right pane, headed "Actions", holds what you can do with it.

   The box shows "Search in current filters…", because the list holds only stakeholders; [the answer on avoiding adding the same person twice](http://support.gilb.com/help/how-do-i-avoid-adding-the-same-person-twice) shows more about the search. GilbApp shows only the kinds of information the card already holds; a kind with nothing in it is not drawn. If you can only read the vault that holds the card, the card has no "Edit" and no "+ Add Information", and nothing on it can be changed. You do not need the right pane here.

   ![The Stakeholders list with the start of a name typed in the box marked RECORDS, one match left, and that person's row outlined in orange.](http://support.gilb.com/help/media/f77a9f68cdc266cd.png)
   What you see: In the box marked "RECORDS" above the list, type the person's name or its first letters until the line under the box reads "1 match" and only their row is left. Press that row, outlined in orange, to open their card.
3. Press "+ Add Information".

   Scroll down to the foot of the person's card and press "+ Add Information". A list headed "Add information" opens over the whole window.

   The list holds only the kinds of information the card does not show yet, under headings such as "Connection points" and "Contact preferences". The "+" beside "Edit" at the top right of the card opens the same list; its "Search" box narrows the list, and "Cancel" closes it. Below the button, a card not yet connected to the person's own online card, the card a person keeps about themselves on GilbPlatform, has "Find their online card"; you do not need it here.

   ![The made-up person's card in the middle of GilbApp, with the button "+ Add Information" at the foot of the card outlined in orange.](http://support.gilb.com/help/media/da0eae8bceffe3ad.png)
   What you see: The person's card opens in the middle. Scroll to the foot of the card and press the wide button "+ Add Information", outlined in orange. At the top of the card, under the name, it says "Person · your card only".
4. Under "Connection points", choose "Postal Address".

   In the list, under "Connection points", choose "Postal Address". The card shows a frame headed "Postal Address" with an empty address form, and the cursor is in "Location".

   The card is now in edit mode: "Edit" at the top right reads "Done", and the card says "Editing. Changes save as you leave a field." The name "Postal Address" comes from GilbVeda, the shared list of terms, so it can change. If "Postal Address" is not in the list, the card already shows an address, or it offers none: press "Edit", then press "⊕ Add Postal Address" under the addresses.

   ![The list headed "Add information" over the whole window, with "Postal Address" under "Connection points" outlined in orange.](http://support.gilb.com/help/media/3197e28b3b350478.png)
   What you see: A list headed "Add information" fills the window, with "Search" and "Cancel" at the top. Under the heading "Connection points", press "Postal Address", outlined in orange.
5. Type the address lines you know, from "Location" down.

   Type your own name for the address in "Location", such as home or work, and the street in "Street..". Type any other lines you know in "Address 1", "Address 2" and "Postal Code".

   "Location" becomes the address's heading on the card; it suggests home, work, home2 and cabin, and you may type any word. Under "Street.." the form says "Kept on this card in your vault. Local cards are never shared to GilbConnect's public search." \(GilbConnect is where people on GilbPlatform look each other up.\) The names "Address 1", "Address 2" and "Postal Code" come from GilbVeda. Every box is optional, and a postal code is kept as you type it, with no check. Press Tab to go to the next box. What you typed is saved when you leave the form or press Return in a box; "Close" closes the form and throws away what is not saved yet.

   ![The made-up person's card in edit mode with the address form open, home typed under "Location" and a street under "Street..", and the box under "Location" outlined in orange.](http://support.gilb.com/help/media/117d472ba82b5a96.png)
   What you see: The card is now being edited \("Done" at the top right\) and a "Postal Address" form is open. Type a label such as home in the box under "Location", outlined in orange, then type the street in the box under "Street..".
6. Under "City", search and select the city.

   Type the city's name in the box under "City", which shows "Search the place catalogue for a city…", and select it in the list. GilbApp fills in "Region/State" and "Country" and saves the address.

   Places come from a shared catalogue of places, so you choose them and cannot type your own; "No city matches" and what you typed means it found none, and you can leave "City", "Region/State" and "Country" empty. If you choose a country first, "City" searches only in that country. After the save the form closes and the card shows the address under its "Location" heading, with the country's flag. In edit mode, click a saved address to change it and press "Done" under it when you have finished; the red round minus sign at its left removes it at once. "⊕ Add Postal Address" adds another one.
7. Press "+ Add Information" again and choose "Time zone".

   Press "+ Add Information" at the foot of the card again, and under "Contact preferences" choose "Time zone". A frame headed "Time zone" shows a box that reads "Type a city or region, such as Oslo", with the cursor in it.

   The "+" beside "Done" at the top right opens the same list. The frame stands under the heading "Contact preferences", and its line is "Time Zone", a name that comes from GilbVeda. If "Time zone" is not in the list, the card already shows a time zone, or it offers none: click the zone under "Time Zone" to change it.

   ![The list headed "Add information" open again, with "Time zone" under "Contact preferences" outlined in orange.](http://support.gilb.com/help/media/58e8b9cfe97a307d.png)
   What you see: Press "+ Add Information" again. In the list headed "Add information", "Postal Address" is gone from "Connection points". Under "Contact preferences", press "Time zone", outlined in orange.
8. Search and select the time zone.

   Type a city or a region, such as Oslo, and select the time zone in the list, such as Europe/Oslo. The card shows the zone and saves it by itself.

   A time zone here is the zone whose local time decides when it is reasonable to contact the person. It is a zone name, not a number of hours, because the hours change with summer time and the name does not. The list holds the time zones your browser knows, written as region and city; every word you type must be in the name. "No match for" and what you typed means none matched. "Cancel" closes the box and keeps what was there; "Clear" empties a zone that is already set. When you have finished, press "Done" at the top right of the card; what you chose is already saved.

   ![The made-up person's card with Oslo typed in the time zone box and the zone Europe/Oslo in the list below it outlined in orange.](http://support.gilb.com/help/media/e2ec27b5a54377a5.png)
   What you see: Under "Contact preferences", the "Time zone" frame opens a box. Type a city, here Oslo, and press the matching zone "Europe/Oslo" in the list just below the box, outlined in orange. The saved address shows above it.

## Deeper

Each address is kept as its own record about the person, in the vault that holds the card. Everyone who may read that vault sees them and the time zone; GilbApp has no setting for who sees each one. What you add here does not change anything the person keeps about themselves on GilbPlatform. A person can have several addresses, each with its own "Location".

Which kinds of information a person's card offers, and their names, come from GilbVeda, the shared list of terms, so they can change without a change to GilbApp. A kind with nothing in it is not drawn on the card until you add it.

This answer is written for a computer screen.

Source: GilbApp af0f04ee838a4d55887d2ff1f72edd49a4ff7ca0 \(https://gilb.com/app/version.json, built 2026-11-09, read 2026-11-10\). gilbAppMenuRows.ts:144-151 \(Stakeholders, its line\); RegisterScopedSearch.tsx:56-75 \(box mark and placeholders\), RecordGrid.tsx:1196-1204; stakeholdersEntry.ts:1-30 \(the list is Records with the stakeholder types\); RecordDetail.tsx:572-593 \(field set from GilbVeda via gilb-stakeholders\), :736-760 \(sections found by term: postalAddress, employment, skill\), :810-821 \(canEdit\), :1533-1557 \(AddressRows\), :1773-1824 \(header, Edit and +\), :2076-2099 \(time zone in Contact preferences\), :1982-2134 \(card groups, Add Information at the foot\); cardMode.tsx:1-15, :243-304 \(Edit/Done, +, Editing line\); CardGroup.tsx:10, :20-33 \(chooser headings\), :160-190 \(empty groups hidden, opened group focused\); AddInformation.tsx:21-147 \(button, sheet, Search, Cancel, Add information\); OneCardFind.tsx:200-282 \(foot words, Find their online card\); AddressRows.tsx:1-75 \(each address its own t:PlaceClaim in the vault that holds the record\); PlaceClaimsCard.tsx:89, :700-960 \(frame, Add button, Location, Street.., hint, lines, City, Region/State, Country, autosave, Close\), :1022-1700 \(saved address, Done, remove\), placeFieldClaim.ts:116-127 \(Address 1/2, Postal Code\); PlacePicker.tsx:54, :300-500 \(placeholders, matches, no-match line\); PersonFieldRow.tsx:28-65 \(time zone picked\); FieldRow.tsx \(Add &lt;label\>, picker\); TimeZonePicker.tsx:15-47; PickerBox.tsx:105-170 \(No match for, Cancel, Clear\); timeZones.ts:20-72. GilbVeda read publicly 2026-11-10: a:postalAddress 'Postal Address', a:timeZone 'Time Zone' \(a:does quoted for the gloss\), a:addressLine1 'Address 1', a:addressLine2 'Address 2', a:postalCode 'Postal Code', all a:fieldOf t:Person or address fields; /base/vocab?status=all: 18 fields of t:Person.
