# How do I approve the plan, or say what to change?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

When Kai-Zen shows the whole plan, type your go or what you want changed in "Write a message…" and press "Send".

## Before you start

A project [started with Kai-Zen](http://support.gilb.com/help/how-do-i-start-work-with-kai-zen) in GilbApp's chat, and Kai-Zen's message that shows the whole plan and asks for your one approval. The pictures show a made-up person on a test site; your screen shows your own name and address. Their plan is short and made up, and shows no links.

## Steps

1. Read Kai-Zen's message that asks for your approval.

   The message lists what you approve: the plan, the steps Kai-Zen suggests with what each should bring and cost, every [assumption](http://support.gilb.com/help/what-is-an-assumption), every goal you set that is hard to reach, every goal that supports nothing above it, and every open point. A goal here is a Value, a goal for how well your app must do something.

   Each part comes with a link that opens it as a card in GilbApp. The plan's parts also show as cards under "Plan".

   If something is not clear, ask before you approve; [the answer on what Kai-Zen says](http://support.gilb.com/help/kai-zen-says-something-i-do-not-understand-or-stopped-what-now) shows how.
2. Type your go, or what you want changed, in "Write a message…".

   In the box that shows "Write a message…", type your go, such as Approved, or say in your own words what you want changed, such as:
   Leave out payments in the first version. Make the sign-up page the first step.

   You can name several changes in one message. Kai-Zen changes what you send back, then asks once more for your approval.

   ![GilbApp's chat on the left with Kai-Zen's message asking for approval of the whole plan, and the box "Write a message…" at the foot of the chat holding "Approved.", outlined in orange.](http://support.gilb.com/help/media/bdca213bd159a1a8.png)
   What you see: On the left, the chat shows Kai-Zen's message with the whole plan, and its question at the end. At the foot of the chat, the box "Write a message…", outlined in orange, holds your go, typed as Approved. or as the changes you want.
3. Press "Send".

   Press "Send", or press Return. Shift and Return starts a new line without sending. While Kai-Zen is still writing, the button reads "Queue"; press it the same way.

   Once you approve, Kai-Zen offers numbered choices: another round to make the plan more exact, a review in which the agents look for weak spots and parts the plan covers poorly, or an explanation of how a kind of goal, such as security or ease of use, is handled, with your own goals as examples. Reply with a number, or say go on. It runs what you choose and offers again until you say go on; then it [starts the first step](http://support.gilb.com/help/when-do-i-actually-start-making-the-app).

   ![GilbApp's chat with Kai-Zen's message asking for approval, "Approved." typed in the box at the foot, and the button "Send" to the right of the box outlined in orange.](http://support.gilb.com/help/media/5e159a54cdbcb820.png)
   What you see: Your go, Approved., is typed in the box at the foot of the chat. The button "Send" to the right of the box, outlined in orange, sends it; Return does the same.

## Deeper

Also asked:

How do I approve my plan? Reply in the same chat when Kai-Zen asks for your one approval: type your go, such as Approved, and press "Send". GilbApp has no approve button for the plan.

How do I change something in the plan before it is built? Write what you want changed in that reply. Kai-Zen changes it and asks once more.

Can I skip the approval? Yes, if you say so in your own words. Kai-Zen then starts the first step without asking for your approval.

Who gives the approval? You, or the person you named when Kai-Zen asked; [the answer on who approves the plan](http://support.gilb.com/help/who-approves-the-plan-and-can-others-give-their-opinion) tells more.

Before any building starts, Kai-Zen, the planning agent, stores the whole plan in the project's vault, reads it back and shows it to you for one approval. Approving says the plan describes what you want: who the app is for, what it must do and how good it must be. The approval is the easiest time to change it; [the answer on a plan that looks wrong](http://support.gilb.com/help/my-plan-looks-wrong-or-too-big-how-do-i-fix-it) has ideas on what to look for.

If Kai-Zen works in Claude Code in a terminal instead of GilbApp's chat, reply there in the same way: type your go or your changes and press Return.

A change you want after the approval goes as [a change to the product while the project runs](http://support.gilb.com/help/how-do-i-change-the-product-while-a-project-runs). Later, Kai-Zen asks again before some acts, such as putting a change live; [the answer on why Kai-Zen stops and asks](http://support.gilb.com/help/why-does-kai-zen-stop-and-ask-or-follow-a-standard) lists them.

This answer is written for a computer screen.

Source: Standards Kai-Zen.New \(Show: "show the project and the suggested VTT for one approval", waived in the requester's own words; Cycle: after the approval, the first step\), Kai-Zen.AskRules.EndApproval \(what is approved; "Change what the requester sends back. Then ask once more."; the numbered offers after approval, until they say go on\), Kai-Zen.AskRules.Links \(every record as a link that opens it in GilbApp\), Kai-Zen.AskRules.Form \(answer with a number or in own words\), read 15 November 2026. GilbApp d5296208 \(https://gilb.com/app/version.json, read 15 November 2026\): src/components/agent/AgentChat.tsx:2288 \("Write a message…"\), :2333 \("Send"/"Queue"\); src/shell/gilbAppMenuRows.ts:162 \("Plan"\); no approve button for a plan in src/. Live help pages, sentences shared: Who approves the plan, and can others give their opinion?; Kai-Zen says something I do not understand, or stopped. What now? \(Return sends, Shift and Return\); Why does starting take so long, and can I go faster? \(skipping the approval\); My plan looks wrong or too big. How do I fix it?; When do I actually start making the app?
