# How do I get a delivery letter written?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

Press "Main menu", choose "Choose an agent", choose "Kai-Zen - Master Agent of Planning", type which delivery and for whom, and press "Send".

## Before you start

[A project Kai-Zen set up for you](http://support.gilb.com/help/how-do-i-start-work-with-kai-zen), with a delivery that is live, and your own AI, Claude Code or Grok, [connected in GilbApp's chat](http://support.gilb.com/help/how-do-i-connect-my-ai-to-gilbapp-chat). The pictures show a made-up person on a test site; your screen shows your own name and address.

## Steps

1. Press "Main menu" at the top left and choose "Choose an agent".

   Press "Main menu", next to your profile picture at the top left, and under "FOR YOU" choose "Choose an agent" \("Pick or connect an AI agent."\). The button shows the name of the section you are in, such as "Vaults". GilbApp opens the left pane, where you chat, and puts the cursor on the agent list at the top of it.

   The square button at the far left of the top bar also shows or hides the left pane. You can also search for "Choose an agent" in "Search or run a command".

   ![GilbApp with the "GO TO" panel open; "Choose an agent" under "FOR YOU" is outlined in orange.](http://support.gilb.com/help/media/f8ec51a0539f1763.png)
   What you see: The panel headed "GO TO" is open. In the right-hand column under "FOR YOU", the outlined row reads "Choose an agent" and "Pick or connect an AI agent." Click it; the chat opens in a pane on the left.
2. Choose "Kai-Zen - Master Agent of Planning" in the agent list.

   Press the agent list at the top of the left pane and choose "Kai-Zen - Master Agent of Planning". Each agent has its own chat, and the list shows which one you are in.

   A new chat starts on the first agent in the list, "Jackfruit - Master Agent of Vaults and Information". The list comes from GilbPlatform each time the chat opens. GilbApp keeps your choice for this browser tab. While an agent is answering, the list is greyed out.

   ![GilbApp with the chat open in the left pane; the agent list at its top, showing "Jackfruit - Master Agent of Vaults and Information", is outlined in orange.](http://support.gilb.com/help/media/dbe12fad98b0e286.png)
   What you see: The chat is open in a pane at the left. At the top of that pane the outlined agent list reads "Jackfruit - Master Agent of Vaults and Information", the first pick; the "Connect" button sits to its right. Click the list to choose another agent.
3. Type the delivery and who the letter is for in "Write a message…" and press "Send".

   In "Write a message…", name the project's vault, the delivery, and the person the letter is for, then press "Send". A delivery letter tells someone outside the team, such as a client, a developer who builds on GilbPlatform or a partner, what they can now do.

   Return also sends; Shift and Return starts a new line. If you do not say where the project is kept, Kai-Zen looks for it in the vaults you can reach; if several fit, it asks which one. While it works, the pane says "The agent is writing…", then "Ran" and the name of each tool it uses, and "Send" reads "Queue". Kai-Zen writes a letter only when the delivery is "REAL": live, and read back, which means checked again after it went live, where the person uses it. For example:
   Project in vault gardenclub: write a delivery letter to our client about the new sign-up page.

   ![GilbApp with Kai-Zen chosen in the chat and a request for a delivery letter typed in the box at the bottom; "Send" to the right of it is outlined in orange.](http://support.gilb.com/help/media/ef308c73598c1f0c.png)
   What you see: The agent list at the top of the chat reads "Kai-Zen - Master Agent of Planning". At the bottom, a request for a delivery letter about a new sign-up page is typed in the box. The outlined "Send" is to the right of the box. Press it.

## Deeper

Also asked:

Can I get a written summary of what was delivered? Yes: Kai-Zen drafts a delivery letter for someone outside the team once the delivery is live and read back. For yourself, each Kai-Zen report says what is done, what is not and why; the answer [How do I read what an agent hands back?](http://support.gilb.com/help/how-do-i-read-what-an-agent-hands-back) shows how.

Kai-Zen drafts the letter; you send it. Its rules say it puts the draft in your own mail app, as a draft, and keeps a copy, with its evidence, where the project is kept. If you have the draft open in your mail app when it needs a change, Kai-Zen asks you to close it, or tells you the exact line to change.

The letter uses plain words and short sentences, and names what the person can now do, not how it was built. Its subject names that and ends with the word live in brackets. It says from when the delivery is live, with the time worked out from the platform's own time in UTC, the world's reference time, into the person's time zone, which it names; how the delivery was read back; and what is not yet measured, with a request for the person's own number. It never claims a gain that was not measured where the person works.

Then it gives the exact request the person sends, ready to copy, such as the address a developer's app asks for, and what the answer now carries; and what did not change, such as an old way that still works. When an earlier letter was wrong, the next one corrects it in one line at the end: what it said, and what is right. It ends with what is next, in one line, and asks at most one question, last, with a default answer, so the work also moves on if the person does not reply.

There is one letter for each delivery, or for a small group of deliveries that went live together, and finished news is not held back for a later letter. Kept with the letter, and not sent, are its evidence \(which version was live, when it was read back and by whom, and what was not measured\) and its status: draft or sent, by whom and when.

GilbApp has no control that writes or sends a letter. From GilbApp's chat Kai-Zen works only with the vault, so it cannot reach your mail app from there, nor a folder on your computer unless you choose it as a code folder while Claude Code is connected. The answer [How do I let my AI build in a folder on my computer from GilbApp's chat?](http://support.gilb.com/help/how-do-i-let-my-ai-build-in-a-folder-on-my-computer-from-gilbapps-chat) shows how. In Claude Code in Terminal you can ask the same way. Start Claude Code, type this line with your own short name, the one you gave your AI when you [connected your computer](http://support.gilb.com/help/how-do-i-connect-my-computer-to-my-vault), and press Return:
/mcp\_\_gilb-&lt;short name\>\_\_agent
Then say which project, which delivery and who the letter is for, and press Return.

This answer is written for a computer screen.

Source: Standards read 2026-11-10: Kai-Zen.LetterRules \(K 06gkzgkdmdxek0965n2zg8j4w4\), all 10 rules and its preamble \("a letter that reports a delivery to someone outside the team: a client, a developer who builds on the platform, a partner"\): Real \("live and read back where the reader uses it. Say how it was read back."\), One, Plain \("Name what the reader can now do, not how it was built."\), Request \("the exact request the reader sends, ready to copy, and what the answer now carries"\), Changed \("An old way that still works is said to still work."\), Unmeasured \("Never claim a gain you did not measure where the reader works ... ask the reader for their number"\), Time \("Take the UTC timestamp from the platform's own output, convert it ... to the reader's zone, and name the zone"\), Correct, Ask \("at most one question, last, with your default answer, so silence also moves the work on"\), Send \("The person sends; the agent drafts. Put the draft in the person's own mail app as a draft and keep a copy, with its evidence, where the project is kept. A draft the person has open cannot be changed by a script: ask them to close it, or tell them the exact line to change."\); Kai-Zen.LetterTemplate \(K 06gkzgkycnxhz4zz6kmcjt0pmg\) Blank \("Subject: &lt;what the reader can now do\> \(live\)"; "Kept with the letter \(not sent\): evidence line \(served revision, readback time and who ran it, what was not measured\), status \(draft / sent, by whom, when\)"\) and Example \(GET request under "What to send"\); Kai-Zen step Report \(hands off to Kai-Zen.LetterRules\). GilbApp af0f04ee838a4d55887d2ff1f72edd49a4ff7ca0 \(version.json read 2026-11-10\), code read: no letter or mail-draft control \(the code shows only the contact rows' e-mail links, components/records/ContactRows.tsx:717-741, unrelated\); steps 1-2 and the step 3 chat sentences are \(AgentChat.tsx:545, :551-553, :888, :1046, :1063, :710-714\). Code-folder exception: GilbApp 49b1ae53 \(https://gilb.com/app/version.json, read 13 November 2026\), src/components/agent/AgentChat.tsx:677-692 and :1084-1090 \("Choose a code folder", "Code in", Claude Code only\); live answer How do I let my AI build in a folder on my computer from GilbApp's chat? Live answer How do I read what an agent hands back? \(Kai-Zen's own report\).
