# How do I give my AI access to a vault?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

Open "▸ GRANT ACCESS" on the vault, choose "Vault", paste the AI vault's address, choose "read", press "Grant", then do the same with "write".

## Before you start

You need to be [signed in to GilbApp](http://support.gilb.com/help/how-do-i-sign-in-to-gilbapp) on a computer, with [your AI vault made and bound](http://support.gilb.com/help/how-do-i-make-an-ai-vault-and-connect-claude-code-to-it), each by its own answer, and its address, shown after "AI vault live:" when you made it.

"Control" on the vault your AI should work in. The pictures show a made-up person on a test site; your screen shows your own name and address.

## Steps

1. Press "Main menu" at the top left and choose "Vaults".

   Press "Main menu", next to your profile picture at the top left, and under "YOUR SECTIONS" choose "Vaults". The button shows the name of the section you are in, such as "Vaults".

   The "Vaults" screen lists your vaults as cards. Your AI vault is listed under the vault you made it in. If you no longer have its address, press its card's panel button: the pane shows the address under "VAULT ID", with "⧉" to copy it.

   ![GilbApp with the "GO TO" panel open, and "Vaults" under "YOUR SECTIONS" outlined in orange.](http://support.gilb.com/help/media/f27a4448ef08b91b.png)
   What you see: At the top left, next to your profile picture, is the "Main menu" button; here it reads "Vaults" with a small arrow. Pressing it opens a large panel headed "GO TO". In its left column, under "YOUR SECTIONS", the first row is "Vaults", "Where your data lives. Open, create and share." That row has the orange outline: click it. "Close" at the panel's top, or the Esc key, closes the panel.
2. Press the panel button at the top right of the vault's card.

   Press the small square button at the top right of the card of the vault your AI should work in; its hover text is "Show vault info". The pane on the right shows that vault's details.

   Clicking the card itself only selects it; on a computer it does not open the pane.

   ![The "Your vaults" screen with the vaults as cards, and the panel button at the top right of one card outlined in orange.](http://support.gilb.com/help/media/b3fcd726b2ffee7c.png)
   What you see: The middle of the screen is headed "Your vaults" and lists your vaults as cards. Your AI vault's card sits just under the vault you made it in, set in a little with a small corner mark before its name. Find the card of the vault your AI should work in and click the small square button at that card's top right; in the picture it is the top card's button, outlined in orange.
3. In that panel, scroll down and open "▸ GRANT ACCESS".

   Below the vault's details find "OTHER PEOPLE AND GROUPS ACCESS RIGHTS" and open "▸ GRANT ACCESS".

   Only someone who holds "Control" on the vault sees this part. Its first part, "PUBLIC" with "Make public", makes the vault readable by anyone; you do not need it. "▸ CONNECT AI" below is where you made the AI vault; you do not need it here.

   ![The vault's pane scrolled to "OTHER PEOPLE AND GROUPS ACCESS RIGHTS", with "▸ GRANT ACCESS" outlined in orange.](http://support.gilb.com/help/media/c2248ef42d09eac9.png)
   What you see: The grey pane on the right now shows the chosen vault: "NOTES", then "YOUR ACCESS RIGHTS" with "Read", "Write" and "Control", then "OTHER PEOPLE AND GROUPS ACCESS RIGHTS" with "No one else has access here yet." Just below that, the closed fold "▸ GRANT ACCESS" is outlined in orange: click it. "▸ CONNECT AI" below it is not needed here.
4. Under "SHARE WITH", choose "Vault".

   "Person" is chosen when the section opens; press "Vault". The line under it then says "Vault-to-vault reach. ⛔ Not a person grant — a person will get no access from this."

   Your AI acts as its AI vault, not as a person, so it gets access only through "Vault".

   ![The open "▸ GRANT ACCESS" section under "SHARE WITH", with "Vault" outlined in orange.](http://support.gilb.com/help/media/80cadaf1a8bf29b0.png)
   What you see: In the right pane, "▾ GRANT ACCESS" is open. It starts with "PUBLIC" and "Make public", which you skip. Under "SHARE WITH" are two buttons: "Person", chosen, and "Vault". "Vault" is outlined in orange: click it. Below, with "Person" chosen, "ACCESS" offers "Read", "Write + Read", "Append" and "Control", and "Grant" is still pale.
5. Paste the AI vault's address in the search box.

   Click the box that shows "Search a name, or paste a vault address \(…/vault\)" and paste the AI vault's address, ending in /vault.

   Typing the AI vault's name does not find it: the name search offers only people's own vaults. If the box holds something that is not a vault address, "Grant" answers "Vault-to-vault reach needs a vault address — a person’s vault ends in /vault, a platform vault in /base. To share with a person, switch to Person." The address of the vault you are on is refused with "A vault cannot grant access to itself."

   ![The "▸ GRANT ACCESS" section with "Vault" chosen and the empty search box outlined in orange.](http://support.gilb.com/help/media/8b5489dde8e8a65d.png)
   What you see: In the right pane, "Vault" is now chosen under "SHARE WITH", with the line "Vault-to-vault reach. ⛔ Not a person grant — a person will get no access from this." Under it, the empty box "Search a name, or paste a vault address \(…/vault\)" is outlined in orange: click it and paste your AI vault's address. Below are "ACCESS" \("read", "write"\), "ONWARD REACH" and a pale "Grant".
6. Under "ACCESS", choose "read".

   Press "read" under "ACCESS"; it is chosen when the section opens. "read" lets your AI read what is in the vault.

   For a vault there are only "read" and "write", given one at a time; "Append" and "Control" are offered only for a person. "read" gives no writing, so you give "write" too, in steps 9 and 10.

   ![The "▸ GRANT ACCESS" section with the AI vault's address in the box, and "read" under "ACCESS" outlined in orange.](http://support.gilb.com/help/media/a379dbc33870bb67.png)
   What you see: In the right pane, the box under "SHARE WITH" now holds the pasted AI vault address. Under "ACCESS" are two buttons, "read" and "write"; "read" is dark, which means chosen, and is outlined in orange: leave it chosen or click it. "ONWARD REACH" and the "Grant" button, now dark, are below.
7. Under "ONWARD REACH", choose "Stops here" or "Passes up hierarchy".

   Choose "Stops here" or "Passes up hierarchy"; "Stops here" is chosen when the section opens.

   With "Stops here", your AI reaches this vault and no further. With "Passes up hierarchy", it also reaches the vaults this vault has itself been given access to, with either choice, and goes on from those only where they were given access with "Passes up hierarchy". Neither choice lets anyone into your AI vault: no one can be given reading or writing in it.

   ![The "▸ GRANT ACCESS" section with "Stops here" under "ONWARD REACH" outlined in orange.](http://support.gilb.com/help/media/e5383ba04fb1ab2b.png)
   What you see: In the right pane, below "ACCESS" \("read" chosen\), "ONWARD REACH" offers "Stops here" and "Passes up hierarchy". "Stops here" is chosen and outlined in orange; the line under it reads "Only the grantee vault gets this access — no inheritance." Keep "Stops here", or click "Passes up hierarchy" if you want that. "Grant" is just below.
8. Press "Grant".

   Press "Grant". The screen says "Vault granted · read · stops here", or "passes onward" at the end, and the list above the form shows the AI vault's address with "vault · read · stops here" or "vault · read · passes onward".

   The button stays grey while the box is empty and reads "Granting…" while it works. The box is empty again afterwards.

   ![The "▸ GRANT ACCESS" section with the address, "read" and "Stops here" chosen, and the "Grant" button outlined in orange.](http://support.gilb.com/help/media/a92229aef28ed3c3.png)
   What you see: In the right pane, the AI vault address is in the box, "Vault", "read" and "Stops here" are chosen \(dark\), and the line "Only the grantee vault gets this access — no inheritance." sits above the wide button "Grant". "Grant" is outlined in orange: click it. "▸ CONNECT AI" below is not needed.
9. Paste the AI vault's address in the search box again.

   Paste the AI vault's address in the box that shows "Search a name, or paste a vault address \(…/vault\)" again.

   "Vault" and your "ONWARD REACH" choice stay as they were.

   ![The pane after the first grant, with the AI vault's line in the list and the empty search box outlined in orange.](http://support.gilb.com/help/media/b4f5dfc90b0ecba5.png)
   What you see: In the right pane, the access list at the top now shows a line for your AI vault's address with "vault · read · stops here" and a small "×" at its right. Below the button "Grant" the green line reads "Vault granted · read · stops here". The address box under "SHARE WITH" is empty again: the box "Search a name, or paste a vault address \(…/vault\)" is outlined in orange. Click it and paste the AI vault's address again.
10. Under "ACCESS", choose "write" and press "Grant".

    Press "write" under "ACCESS", then press "Grant". The screen says "Vault granted · write" and the onward reach, and the list shows a second line for the AI vault with "write".

    Your AI can now read and write in this vault. It sees the access on its next call; you do not need to restart Claude Code. [The answer on checking that your AI can reach your vault](http://support.gilb.com/help/how-do-i-check-that-my-ai-can-reach-my-vault) tells you how to test it.

    ![The "▸ GRANT ACCESS" section with the AI vault's address in the box again, and "write" under "ACCESS" outlined in orange.](http://support.gilb.com/help/media/0064e95be5cfcd23.png)
    What you see: In the right pane, the box under "SHARE WITH" holds the AI vault address again. Under "ACCESS", "read" is still dark, chosen, and "write" beside it is outlined in orange: click "write". Then press the wide button "Grant" further down, under "ONWARD REACH", where "Stops here" is still chosen.

## Deeper

Also asked:

Should my AI get read or write access? "read" alone where it should only look; "read" and "write" where it should also make or change records. "write" alone does not let it read what is there.

Can I let an agent only read, never write? In Claude Code or Codex, yes: an agent there acts as your AI vault, so give that AI vault only "read" on the vault. In GilbApp's chat an agent works as you, with your own access, so a grant here cannot limit it.

What does "Onward reach" mean? Whether the vault you give access to reaches only your vault \("Stops here"\), or also the vaults your vault was given access to \("Passes up hierarchy"\).

Your AI reaches its own AI vault, any vault it makes there, and the vaults you give its AI vault access to; with no grant it reaches none of your vaults. Give access on each vault it should work in, the same way.

Which to give: "read" alone where your AI should only look, such as a vault it reads to answer your questions; "read" gives no writing, so it cannot add, change or end anything there. "read" and "write" where it should also make or change records, such as the vault of a project it plans or builds with you; the steps above give both. "write" does not include "read": with "write" alone your AI could write in the vault but not read what is there. Give your AI vault access only on the vaults it should work in.

The agent you chat with in GilbApp is not your AI vault: it works as you, with your own access, so it needs no grant here.

To [take the access away](http://support.gilb.com/help/how-do-i-take-access-away), press "×" at the right of the AI vault's line in the list; that has its own answer. Your AI loses the vault from its next request.

Step 6 in "▸ CONNECT AI" says to find your AI's vault by the name you gave it. The name search does not find it: paste its address, as above.

This answer is written for a computer screen.
