# How do I know my project is finished, and that my app reached what I wanted?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

Ask Kai-Zen where the project stands: it shows each goal against the number you aim for. You decide when it is finished.

## Deeper

Your project is finished when you say so. Kai-Zen, the planning agent, has your plan built one step at a time. After each step it shows you how far each goal has come and the next step it suggests. A goal here is a goal for how well your app must do something, with a number you want to reach. Kai-Zen goes on to that next step unless you tell it to change the plan or that you are done. GilbApp has no mark for a finished project.

How to see if your app reached what you wanted. Ask Kai-Zen in the chat where the project stands, as the answer [How do I continue a project with Kai-Zen?](http://support.gilb.com/help/how-do-i-continue-a-project-with-kai-zen) shows. For each goal it shows where the goal stands now, against the worst number you can live with and the number you aim for, and what has been spent so far against your budget. You can also look yourself: in GilbApp's plan, beside each goal, "Status" is where it stands now, "Tolerable" the worst number you can live with, and "Goal" the number you aim for; the gap from "Status" to "Goal" is what is still to go. The answer [How do I read the plan table's charts and numbers?](http://support.gilb.com/help/how-do-i-read-the-plan-tables-charts-and-numbers) shows where they are.

What you wanted, in your own words, is in the project's set-up record, which Kai-Zen stored in the project's vault, a place on GilbPlatform where records are kept, when the project started: what the project should change, and for whom. Read it beside what your app does now. The answer [Where is what I tell Kai-Zen written down, and where is my plan kept?](http://support.gilb.com/help/where-is-what-i-tell-kai-zen-written-down-and-where-is-my-plan-kept) shows where it is.

What counts. A goal's number counts only when it was measured, where the people your app is for use it. A number nobody measured, or one taken only on your own computer, does not move it. After a step goes live, Kai-Zen asks you to [check it live](http://support.gilb.com/help/how-do-i-check-my-app-once-it-is-live); then it has each goal the step aims at measured, by an agent other than the one that built it. An agent is your AI following one written procedure, its standing instructions, for one kind of work. If your app has changed since a goal was last measured, the goal is measured again before a report leans on it. The answer [What counts as proof that something works?](http://support.gilb.com/help/what-counts-as-proof-that-something-works) tells more.

What Kai-Zen does when a version is done. Kai-Zen counts a step as done once it is live and its goals have been measured. After each step it updates where each goal stands, makes the plan more exact with what it learned, and shows you the measured goals and the next step. It stops and asks you first if the spend so far is over your budget, or if a goal is still below the worst number you can live with where the plan expected it above. When you say you are done, it picks no more steps. A step Kai-Zen has picked but not yet built shows "Planned" in GilbApp's plan.

Then end the session, one stretch of work with Kai-Zen, by typing close. Kai-Zen finishes or stops the work in hand and says what is not done, saves everything where the project is kept, and puts live what should be live but is not; before that it always stops and asks you. Last, it writes a handoff, a note of what was done, what is open and where to start next time. The answer [How do I end a session?](http://support.gilb.com/help/how-do-i-end-a-session) shows how.

The signs that a first version is ready to go live are in the answer [When is my app, website or program finished?](http://support.gilb.com/help/when-is-my-app-website-or-program-finished) For a written letter about what was delivered, to someone outside your team, see [How do I get a delivery letter written?](http://support.gilb.com/help/how-do-i-get-a-delivery-letter-written)

Finished is not the end. You can come back later and build more; the answer [Can I pause my project, come back later and build version 2?](http://support.gilb.com/help/can-i-pause-my-project-come-back-later-and-build-version-2) shows how, and [How do I update my app after it is live?](http://support.gilb.com/help/how-do-i-update-my-app-after-it-is-live) shows how a new version goes live.

This answer is written for a computer screen.

Source: Kai-Zen standards: Kai-Zen.Existing.Report \(asked where the project stands: each goal's standing against the worst acceptable number and the number aimed for, and the spend against the budget\); Kai-Zen.Cycle \(Human, Measure: measured by an agent other than the builder; Update; Improve; Next: shows the measured goals and the next step, stops and asks if the spend is over the budget or a goal is still below its worst acceptable number where the plan expected it above, otherwise goes on unless the requester says re-plan or done; Exit.Done\); Kai-Zen.ValueDeliveryStepRules \(Status: Planned, Building, Developed, Production, Retired, a new step starts Planned, Done means live with its measures written; Delivered: measure where real stakeholders use it\); Kai-Zen.EvidenceRules \(Measured, Condition, Fresh\); Kai-Zen.HumanCheck; Kai-Zen.Close \(Finish, Git, Deploy, Handoff, Tell\); Kai-Zen.New.Setup \(the set-up record\); Kai-Zen.ProjectRules \(Outcome, Files\). GilbApp 49b1ae53 \(https://gilb.com/app/version.json, read 13 November 2026\): src/lib/base/planCard.ts:31 \(the five Status words\). Live help pages, sentences shared: When is my app, website or program finished?; How does Kai-Zen run a whole delivery cycle?; How do I read the plan table's charts and numbers?; Where is what I tell Kai-Zen written down, and where is my plan kept?; How do I continue a project with Kai-Zen?; How do I end a session?; What counts as proof that something works?; How do I get a delivery letter written?; How do I update my app after it is live?
