# How do I make a folder and put records in it?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

In "Records", press "＋ New", choose "Create a virtual folder", type a name, press "Create", search and select records under "Add item or nested folder".

## Before you start

You need to be [signed in to GilbApp](http://support.gilb.com/help/how-do-i-sign-in-to-gilbapp) on a computer, with a vault you can write to that holds the records you want in the folder. The pictures show a made-up person on a test site; your screen shows your own name and address.

## Steps

1. Press "Main menu" at the top left and choose "Records".

   Press "Main menu", next to your profile picture at the top left, and under "YOUR SECTIONS" choose "Records". The button shows the name of the section you are in, such as "Vaults".

   A panel headed "GO TO" opens; "Records" reads "People, places, things and notes, as grid, graph or cards." A record is one piece of data with its own address, such as a person, a place, a thing or a note. "Records" shows the vault you picked in "Vaults", or your own vault if you picked none; a vault is the place where a person or a group keeps their records. You can also press "Records" on a vault's card in "Vaults". The folder is made in the vault "Records" shows, unless you choose another in step 4.

   ![GilbApp with the "GO TO" panel open, and "Records" under "YOUR SECTIONS" outlined in orange.](http://support.gilb.com/help/media/22671873f9b38893.png)
   What you see: At the top left, the button with the section name is pressed and the panel headed "GO TO" covers the screen. In the left column under "YOUR SECTIONS", the outlined row reads "Records" with "People, places, things and notes, as grid, graph or cards." under it. It carries "YOU ARE HERE" because the Records screen is already open behind the panel. Click that row.
2. Press "＋ New".

   Press "＋ New" at the right end of the bar with the views "Grid", "Graph", "Both" and "Card". A window headed "New" opens with five choices.

   If "＋ New" is greyed, hover on it for the reason; one reason is that the vault you are viewing is one you can only read. The "GO TO" panel also has "New record" \("A person, place, thing or note."\) under "IN RECORDS"; it opens the same window. "Close" at the top right, or a click outside the window, closes it and makes nothing.

   ![The "Records" list with "＋ New" at the right end of the bar with the views outlined in orange.](http://support.gilb.com/help/media/3eeffbade8f7d3ab.png)
   What you see: The Records screen shows the list in "Grid", with nothing selected. At the top right of the middle, the outlined button reads "+ New". Click it.
3. Choose "Create a virtual folder".

   Choose the card "Create a virtual folder": "A view over things that stay where they are. Nothing moves." The window then asks for the folder's name, with the type "Folder" already chosen.

   A virtual folder is a view that groups records and files without moving them; each may sit in several folders. "Create a record on its own" makes a record joined to nothing, and "Upload a file" puts a file from your computer into the vault. The two cards that read "Select a record first." link to a record you have selected; with one selected they read "Create a record and link it to" it and "Link" it "to a record that already exists". You need none of them here.

   ![The window "New" with five cards, and the card "Create a virtual folder" outlined in orange.](http://support.gilb.com/help/media/87268ad2167cff1a.png)
   What you see: A window headed "New" shows five cards. The outlined second card reads "Create a virtual folder" and "A view over things that stay where they are. Nothing moves." Click it.
4. Type a name in the box that shows "Folder name".

   Under "NAME", type a name for the folder in the box that shows "Folder name", such as Garden plans. The window is now headed "New record".

   Above it, "TYPE" shows "Folder" chosen, with "t:VirtualFolder", its name in GilbVeda, the shared list of terms, beside it; leave it, or the record made is not a folder. The tabs "Things", "Functions", "Values" and "All" and the search box under "TYPE" pick another type, and "↗" shows a type's meaning; you do not need them. "More folder details" opens "NOTES", a box that shows "Optional — this is a view, not a box. Items stay in the flat list."; you do not need it. "CREATE IN" names the vault the folder is made in; if you can write to more than one vault, you can choose another there.

   ![The window "New record" with the type "Folder" chosen and the empty box that shows "Folder name" outlined in orange.](http://support.gilb.com/help/media/ece94704e7c883bb.png)
   What you see: The window is headed "New record" and "Folder" is chosen in the type list. Under "NAME", the outlined empty box shows "Folder name". Click it and type the folder's name.
5. Press "Create".

   Press "Create" at the bottom right of the window. The window closes and the new folder opens in the middle of the screen, with its details in the right pane.

   The button reads "Creating…" while it works. "Create in:" beside it names the vault again. "Cancel" closes the window and makes nothing. The folder is a record of its own and shows in the list like any other record. If the right pane is hidden, press the square button at the far right of the top bar.

   ![The window "New record" with the name Garden plans typed and "Create" at the bottom right outlined in orange.](http://support.gilb.com/help/media/1447f1c54b93ffdf.png)
   What you see: The box under "NAME" now holds the name, here Garden plans. At the bottom right, beside "Cancel", the outlined button reads "Create". Click it.
6. Search and select a record under "Add item or nested folder".

   In the right pane, under "FOLDER VIEW", type a word of a record's name in the box that shows "Search this vault by name…" and select the record in the list under it. GilbApp says "Added to folder view \(still in flat list\)."

   Repeat for each record. The folder's records are listed under "FOLDER VIEW"; each has "Remove", which takes it out of this folder only \("Removed from this folder \(item still in the vault list\)."\) and deletes nothing. The search also finds files, marked "Registered file", and other folders, marked "Nest folder", which then sit inside this one. From a record instead: open it and, in its right pane, open "▸ ADD TO FOLDER" \(shown once the vault has a folder\), choose the folder under "Choose folder…" and press "Add to folder view".

   ![The folder Garden plans open, with Seed typed under "Add item or nested folder" in the right pane and the found record Seed list outlined in orange.](http://support.gilb.com/help/media/a9ff80e6d89f899c.png)
   What you see: The folder is open in the middle. In the right pane, under "FOLDER VIEW", the records already in it are listed, each with "Remove". Under "Add item or nested folder", "Seed" is typed, and the outlined line below reads "Seed list" with "Note". Type part of a name and click the record to add it.
7. To see the folder in the list, press "Show all records".

   Press "Show all records" in the bar with the views, right of "Card"; its hover text is "Return to the list and filters". The whole list of the vault shows again, in "Grid".

   You do not need this step to fill the folder: the right pane of step 6 already lists what the folder holds.

   ![The folder Garden plans with two records listed in the right pane, and "Show all records" in the bar with the views outlined in orange.](http://support.gilb.com/help/media/85d9215d92787ea5.png)
   What you see: The folder is open in the middle, and in the right pane two records are listed under "FOLDER VIEW", each with "Remove". In the bar at the top left, right of "Card", the outlined button reads "Show all records". Click it.
8. Choose the folder in the list.

   Click the folder's row in the list. The list then shows the folder at the top and the records in it under it.

   A folder opens this way, not as a card: the list stays, and the right pane shows the folder with its records under "FOLDER VIEW". With many records, find the row by sorting or filtering, as [the answer on sorting and filtering the list](http://support.gilb.com/help/how-do-i-sort-and-filter-the-list) explains. If you search for it instead, press "✕" in the search box after you select it, or the list keeps showing the search. With the folder selected, "＋ New" offers "Create a record inside" the folder and "Upload a file into" it. "Show all records", whose hover text is now "Leave folder view and show every record in this vault", leaves the folder.

   ![The "Records" list with the row of the folder Garden plans outlined in orange.](http://support.gilb.com/help/media/d8b017e2d61f7150.png)
   What you see: The Records screen shows the whole list in "Grid" with an empty search box. The first row, outlined, is the folder Garden plans, with "Virtual Folder" in the type column. Click it to open the folder.

## Deeper

Also asked:

What is a virtual folder? A virtual folder is a view inside a vault that groups records and files without moving or copying them; one record may sit in several.

Can one record sit in two folders at once? Yes. A virtual folder moves nothing and copies nothing, so a record may sit in several folders at once and stays in the vault's list.

Can I put records into a folder without moving them? Yes, that is how folders work here: a virtual folder is a view that groups records and files without moving them. Taking a record out of a folder does not delete it.

What is the difference between a vault and a folder? A vault is the place where a person or a group keeps their records, and its access decides who may reach them. A folder is a view inside a vault that groups records without moving them; one record may sit in several.

How do I take a record out of a folder without deleting it? Open the folder, and in the right pane under "FOLDER VIEW" press "Remove" beside the record. It leaves this folder only and stays in the vault's list.

A virtual folder moves nothing and copies nothing. A record in it stays in the vault's list, keeps its address, and may sit in several folders at once. Taking it out of a folder does not delete it.

If the folder is public, readable by anyone, GilbApp makes whatever you put in it public too; taking it out of the folder does not make it private again. If something cannot be made public, GilbApp says "The folder is public, but" how many things "in it could not be made public", and names them.

A folder can hold other folders, but not one that already holds it: GilbApp then says "Can't nest that folder here — it already contains this folder \(cycle\)."

A file that an app stored with a folder path of its own shows "FOLDER PATH" in its details, with "The file records this path itself. It is not a folder membership — this file will not appear inside that folder in the list." Put it in a folder as in step 6.

This answer is written for a computer screen.
