# How do I read a standard?

Checked 2026-11-15 against GilbApp d5296208bbffa2ab70076e6194f5537c4be1ddf7.

Press "Main menu", choose "Standards", press the tab of its kind, such as "Processes", choose the standard in the list, and read it.

## Before you start

You need to be [signed in to GilbApp](http://support.gilb.com/help/how-do-i-sign-in-to-gilbapp) on a computer, with a standard in a vault you can read, such as [your own vault](http://support.gilb.com/help/how-do-i-create-my-first-vault). [The answer on writing a new standard](http://support.gilb.com/help/how-do-i-write-a-new-standard) shows how to make one. The pictures show a made-up person on a test site; your screen shows your own name and address.

## Steps

1. Press "Main menu" at the top left and choose "Standards".

   Press "Main menu", next to your profile picture at the top left, and under "YOUR SECTIONS" choose "Standards". The button shows the name of the section you are in, such as "Vaults".

   A panel headed "GO TO" opens; "Standards" reads "Processes, rules, templates and checklists." "Standards" opens on the vault you picked in "Vaults", or on your own vault if you picked none; a vault is the place where a person or a group keeps their records. It opens on the tab "Processes", with "Process" chosen in the row under the tabs. A process is a standard that holds work: entry conditions, steps in order, and exit conditions; a standard is a written procedure, rule set, form or other guide that people and agents follow as they work. On the right, "VAULT" changes the vault, "STANDARDS GROUP" shows only the standards of one group, and "+ New group", shown only where you may write in the vault, makes a group; you need none of them here.

   ![GilbApp with the "GO TO" panel open, and "Standards" under "YOUR SECTIONS" outlined in orange.](http://support.gilb.com/help/media/2f7771842dd46b46.png)
   What you see: The panel headed "GO TO" covers the screen. In the left column under "YOUR SECTIONS", the row "Standards" with the line "Processes, rules, templates and checklists." is outlined. Press it to open the Standards screen.
2. Press the tab of the standard's kind.

   In the row of tabs, press the one for the kind of standard you want to read: "Policies", "Processes", "Procedures", "Rules", "Templates &amp; Forms", "Checklists", "References" or "Lookups". The list of that kind opens below the tabs.

   [The answer on what a standard is](http://support.gilb.com/help/what-is-a-standard-and-why-is-each-one-unique) says what each kind holds. Under "Processes", "Process" and "ProcessCard" choose between processes and process cards. "ⓘ" beside the heading shows a line on what the tab holds. In the "GO TO" panel, resting the pointer on "Standards" shows the same tabs under "IN STANDARDS", so you can choose one there instead. The box under "SEARCH PROCESSES" and "+ New Process" are for [finding](http://support.gilb.com/help/how-do-i-find-a-standard) and [writing a standard](http://support.gilb.com/help/how-do-i-write-a-new-standard); their own answers show them.

   ![The "Standards" screen with its row of tabs, and the "Processes" tab outlined in orange.](http://support.gilb.com/help/media/a774cef67b7a5423.png)
   What you see: Near the top of the middle, in the row of tabs from "Policies" to "Lookups", the tab "Processes" is outlined. Press the tab for the kind of standard you want to read.
3. Choose the standard in the list.

   Click the row of the standard, such as Open the bakery. It opens in the middle of the screen.

   Each row shows the standard's name and, under it, the last part of its address, the web address that names it. A line above the rows says how many there are, such as "2 readable processes in this vault and the sub-vaults you reach." If the vault holds none of this kind, the screen says so instead, such as "No processes are onboarded into this vault yet. Nothing was invented — the vault holds no readable process."

   ![The list of processes, with the row Open the bakery outlined in orange.](http://support.gilb.com/help/media/7b57e69e8d3215cb.png)
   What you see: In the list under "SEARCH PROCESSES", which says "3 readable processes in this vault and the sub-vaults you reach.", the row Open the bakery is outlined. Press a row to open that standard and read it from the top.
4. Read the standard from the top.

   Read the standard from the top: its kind, such as "PROCESS", its name, its tag, then the cards in order. A process shows "Entry conditions", "Steps" and "Exit conditions"; a rule document shows "Rules", a checklist "Questions" and a policy "Statements".

   A tag is the standard's short fixed name, such as Bakery.Open; with none, a line says the vault returned no tag. Each step shows its number, its text, and "ENTITY URI", its address, with "Copy". "↳ hands off to" and a tag under a step links to another standard; [the answer on following a hand-off](http://support.gilb.com/help/how-do-i-follow-a-hand-off-to-another-standard) tells more. A line such as "1 step, in order — all shown." says the list is whole. A standard Kai Gilb publishes also shows a line starting "© 2026 Kai Gilb. All rights reserved." "← All processes" at the top brings the list back. The other buttons and boxes on the standard, such as "Edit tag", "Rename process", "🗑 Delete process" and "Add step", change it; you need none of them to read.

## Deeper

Also asked:

Standards is empty for me. Why? Either no vault is chosen, or the chosen vault holds no standard of that tab's kind; the screen then says, for example, "No processes are onboarded into this vault yet." Try another tab, or another vault under "VAULT".

Can I read the standard an agent follows? Yes. GilbPlatform's agents follow standards in its own vaults, which anyone may read, but GilbApp lists those vaults under "VAULT" only if you were given access; otherwise ask your AI to read one to you. Your own agent's standard is in your vault.

Reading changes nothing. In GilbApp you can read the standards in any vault listed under "VAULT"; to change one you need to be able to write in its vault.

"VAULT", on the right, lists the vaults you have been given access to, your own among them. In GilbApp today a vault anyone may read, such as one that keeps GilbPlatform's own standards, is not in that list unless you have been given access to it; [the answer on the standards packs](http://support.gilb.com/help/what-are-the-standards-packs) tells more.

If no vault is chosen, the screen says so, such as "No vault is selected, so no processes were requested. Nothing was invented." If GilbApp cannot reach GilbPlatform it says "Could not read from GilbPlatform." and why. If a list is too long for one page, a line says "Showing" how many of how many, and that the list is cut to one page.

A standard may also hold free text, shown in a card below its points. At the foot of the screen a line says the standard was read live from GilbPlatform, so what you see is what the vault holds.

If the right pane is hidden, press the square button at the far right of the top bar. This answer is written for a computer screen. In a window narrower than 840 pixels, such as a phone, the side panes are hidden and the right pane is "Detail" in the bar at the bottom.

Source: GilbApp af0f04ee \(https://gilb.com/app/version.json read 2026-11-10 and 2026-11-11 context\), code read: step 1 shared word for word \(shell/gilbAppMenuRows.ts:220-228 label "Standards", description "Processes, rules, templates and checklists."; AppShell.tsx:658 default tab "processes"; components/process/StandardsControls.tsx:66-71, :126-128 \("Vault", "Standards group", drawn uppercase\), :171-184 \("+ New group" only with write\)\); step 2 components/process/standardsTabs.ts:9-24 \(tab labels\), StandardsSection.tsx:252-287 \(SectionTabs\), StandardKinds.tsx:35-43 and lib/base/standardKinds.ts:108-120 \("Process", "ProcessCard"\), StandardsSection.tsx:146-167 + ReachDisclosure.tsx:72-106 \("ⓘ", the line shown when pressed\), shell/gilbAppMenuRows.ts:228 + components/menu/sectionMenuList.ts:212-223 \(tabs as the menu's options\) + section-menu 0.2.4 SectionMenu.tsx:86 \("In ${label}", drawn in capitals\); step 3 StandardsSection.tsx:427-448 \(row: name, id tail, "→"\), :601-605 \(count line\), :540 \(empty sentence\); step 4 ProcessViewer.tsx:1969-1975 \(kind label, uppercase\), :1981-1985 + DocumentTag.tsx:170-205 \(tag pill, "Edit tag"/"Add tag"\), :2029-2213 \(cards "Entry conditions", unit card title, "Exit conditions"\), :168-361 \("Steps", "Rules", "Questions", "Statements"; completeLine "N step\(s\), in order — all shown."\), :1258-1365 \(step row: number, text, handoff, entity URI\), UnitIdentity.tsx:133-149 \("Entity URI" uppercase, "Copy"\), :769 \("↳ hands off to"\), StandardsDocumentNotice.tsx \(attribution line\), StandardsBackControl.tsx:50 + StandardsSection.tsx:838-841 \("← All processes"\), StandardsDocumentActions.tsx:270-290 \("Rename process", "🗑 Delete process"\); Deeper: StandardsControls.tsx:24-97 + AppShell.tsx:478 \(the picker and the read vault come from the reachable list\), lib/base/standardsFamilies.ts:751-752 \(no-vault sentence\), StandardsSection.tsx:318-331 \("Could not read from GilbPlatform."\), :585-591 \(truncation line\), ProcessViewer.tsx:2238-2266 \(body card\), StandardsSection.tsx:289-301 \(provenance line\). GilbPlatform 4d008a55 \(https://id.gilb.com/version read 2026-11-10\): src/authz/reachable-vaults.ts:242-243 \("the reachable-vault LIST does ⛔ not list public vaults"\); src/lws/routes.ts:822-827, :1026-1066 \(writes refused without write access\). Standards \(2026-11-10, 200\): GilbPlatform.StandardRules.Owner, .Tag; GilbPlatform.Licence.Notice. GilbApp 49467c2b \(https://gilb.com/app/version.json, read 14 November 2026\): src/components/process/StandardsSection.tsx:540 \("No processes are onboarded into this vault yet."\). Live help pages: What are the standards packs?; How do I make my own agent?
