How do I see how records are connected (the graph)?
Short answer
Press Main menu, choose Records, press Graph, choose a record in the graph, and press 1 to see the records linked to it.
Before you start
You need to be signed in to GilbApp on a computer, with records in your vault, some of them linked; the answer on linking two records shows how. The pictures show a made-up person on a test site; your screen shows your own name and address.
Words used here (3)
- record
- A record is one piece of data with its own address, such as a person, a place, a thing or a note.
- GilbApp
- GilbApp is the app, opened in a web browser at https://gilb.com/app, where you open, fill and share your vaults.
- relation
- A relation is a named link between two records, such as part-of or connected-to, that says how they are related.
Steps
Press Main menu at the top left and choose Records.
Press Main menu, next to your profile picture at the top left, and under YOUR SECTIONS choose Records. The button shows the name of the section you are in, such as Vaults.


Show as text
The panel headed "GO TO" is open over "Your vaults". In the left column under "YOUR SECTIONS", the outlined row is "Records". Click it.
More about this
A panel headed GO TO opens; Records reads People, places, things and notes, as grid, graph or cards. A record is one piece of data with its own address, such as a person, a place, a thing or a note. Records shows the vault you picked in Vaults, or your own vault if you picked none; a vault is the place where a person or a group keeps their records. You can also press Records on a vault's card in Vaults.
Press Graph.
Press Graph in the row of views above the list. The middle of the screen shows the vault's records as cards, and each line between two cards is a link, named by its relation.


Show as text
The Records screen shows the list in "Grid". In the row of view buttons at the top left, "Grid", "Graph", "Both", "Card", the outlined button is "Graph". Click it.
More about this
A relation says how two records are related, such as part-of. A line with an arrow reads one way, from the record it starts at. Both shows the list and the graph side by side, Grid brings the list back, and Card shows one record. Three small buttons at the bottom right zoom in, zoom out and fit the whole graph on the screen. The line at the bottom left counts the cards (nodes) and the links drawn. + New at the top right makes or links a record; the answer on linking two records shows it.
Choose a record in the graph.
Click the record's card. GilbApp selects it, lays the graph out again around it and marks its lines.


Show as text
The middle now shows the records as cards. Cards that are linked are joined by lines; the others stand at the right. At the top left are the box "Filter nodes…" and the buttons "1", "2", "3", "all". The outlined card at the top left is Garden plan. Click a card.
More about this
The right pane shows the record's details while it is open; the square button at the far right of the top bar shows or hides it. Double-click a card to bring it to the middle and show its details. Click an empty spot to clear the selection. Once a record is selected, the graph shows only the records up to 2 links away from it, until you press another number in step 4.
Press 1, 2, 3 or all to set how far out to show.
Press 1 to see the record and the records linked straight to it. 2 adds the records linked to those, 3 goes one step further, and all shows every record.


Show as text
Garden plan is selected: its card and lines are marked and its details fill the right pane. At the top left, beside "Filter nodes…", are the buttons "1", "2", "3", "all"; "2" is marked and the outlined button is "1". Click a number to set how far out to show.
More about this
The buttons sit at the top left, beside the box Filter nodes…. They count out from the record you selected; with none selected they change nothing, and their hover text says "Select a node to filter by connection depth (1 / 2 / 3 hops from selection, or all).", a hop being one link. When they cannot count, they are grey and say Connection depth unavailable for this set size. The bottom left line then also shows the number you pressed, such as depth≤1.
If the graph is crowded, type part of a name in Filter nodes….
Type part of a record's name in the box that shows Filter nodes…. Only the records whose name holds what you typed stay in the graph.


Show as text
At the top left, "Seed" is typed in the outlined box that shows "Filter nodes…" when empty. Only the cards whose names match stay drawn, here Seed order and Seed list. Type part of a name there.
More about this
It works together with the buttons 1, 2, 3 and all. ✕ at the end of the box clears it. With nothing found, the line at the bottom left starts No records match this filter. Where a card holds parts, Open all and Close all beside the box open or close every such card; you need neither.
To read how two records are related, choose the line between them.
Click the line between two cards. The right pane shows CONNECTION and the relation's name; for a relation with a direction it also shows how it reads each way.


Show as text
Only Garden plan and the three records linked straight to it are drawn, and "1" is marked at the top left. The outlined line runs from the Garden plan card down to the Summer project card. Click the line between two records.
More about this
The pane can also change the relation, measure the link, or end it with End relation; the answer on linking two records shows how. Click a card again to go back to that record's details.
Deeper
Also asked:
What do Show as grid, Show as graph and Show as cards mean? They open Records in one of its views, the same as the Grid, Graph and Card buttons: Rows and columns. (the list), See how records connect. (this graph), and One record at a time.
You can also link two records in the graph by drawing a line. Each card has small dots on its edges; drag from a dot on one card onto another card, and GilbApp saves the link at once with the relation connected-to, or associated-with when both records are people or organisations. The top right says Link saved · and the relation's stored name, such as Link saved · ConnectedTo. To choose another relation, click the new line; the answer on linking two records shows the pane. Drag from a dot onto an empty spot instead, and the panel New connected record opens to make a new record linked to that one. You can draw only in a vault you can write to; elsewhere the dots do nothing.
The graph shows the records of the vault that is open, not of all your vaults. Cards you drag to another place are not kept: GilbApp lays the graph out again the next time. If GilbApp could not read every link, the line at the bottom left says what it could not read. With more than 200 records it draws no lines, and that line says edges withheld above 200 records and connection depth unavailable for this set size.
If the vault has no records it says No records to graph yet. If it cannot read them it says Couldn’t reach your vault; that does not mean you have none.
This answer is written for a computer screen.
Source: GilbApp af0f04ee838a4d55887d2ff1f72edd49a4ff7ca0 (https://gilb.com/app/version.json read 2026-11-09, dirty false); code from the unpack (no checkout). Step 1 (gilbAppMenuRows.ts:117-123; AppShell.tsx:496). Step 2: RecordsCenter.tsx:86-89, :132-152 (Graph, Both, Card); RecordGraph.tsx:1-15 (current record set of the open vault; pan, zoom, fit), :1625-1665 (edge label = relation, arrow when directed), :2139-2180 (ReactFlow: minZoom, maxZoom, zoomOnDoubleClick false; Controls bottom-right at :2180, showInteractive false = three buttons zoom in, zoom out, fit; wheel, trackpad and drag-to-pan not set in GilbApp code, so not told), :2361-2405 (DisclosureText bottom left), :2534-2570, :2682 (nodes and links counts, depth≤N, select a node …); useListedVaultIds.ts (graph reads the open vault); Step 3: graphInteractionContract.ts (click select, double-click navigate); RecordGraph.tsx:1807-1840 (select; navigate = fitView + openRecord), :1870-1877 (pane click clears); AppShell.tsx:1100-1118, :1159-1176 (right pane opens itself only under 840 px); graphRelationCount.ts:55 (default 2), :284-330 (no selection -> all records). Step 4: graphRelationCount.ts:41-46 (1, 2, 3, all), :106-116; RecordGraph.tsx:2242-2290 (group, titles, disabled when !countsAvailable), :677 (countsAvailable = !assembly.cappedOut); disclosure 'depth≤N'. Step 5: RecordGraph.tsx:2222-2240 (Filter nodes…, ✕), :809 (name contains, case-insensitive), :2534 (No records match this filter), :2292-2330 (Open all, Close all only when cards can hide parts). Step 6: RecordGraph.tsx:1841-1866 (line click selects the relation; via lines excepted); AppShell.tsx:1126-1146; RightRegion.tsx:814-815; RelationEditPane.tsx:521-545, :782-800. Deeper 1: RecordGraph.tsx:1896-1970 (mintLink, onConnect), :2011-2019 (onConnectEnd -> openConnectedCreate), :2156 (nodesConnectable only with write), :1946 (Link saved · <name>.); partyTie.ts:1-12, :34-41; relationPredicates.ts:246, :256. Deeper 2: RecordGraph.tsx:10-11 (positions session-local, never persisted); graphHooks.ts:39 (EDGE_ASSEMBLY_MAX 200) and the disclosure edges withheld above 200 records — …; graphHooks.ts:80 (cappedOut = more than 200 records). Deeper 3: RecordGraph.tsx:1761-1776 (notices). GilbApp 49467c2b (https://gilb.com/app/version.json, read 14 November 2026): gilbAppMenuRows.ts:127-132 (Show as grid Rows and columns., Show as graph See how records connect., Show as cards One record at a time.); AppShell.tsx:402-412 (the same view setting as RecordsCenter.tsx:86-89 Grid, Graph, Card).
Checked against GilbApp d529620.