MyJackfruit

Help
Browse topics · Signing in and codes

Signing in and codes

← Signing in and codes

I did not get the code, or it does not work. What now?

Short answer

Search your mail and spam for Your GilbApp sign-in code; else press Change email, Send Code to Email, and type the new code.

Before you start

You have pressed Send Code to Email on the GilbApp card at gilb.com/app, and the card shows Code sent to and your address. The pictures show a made-up person on a test site; your screen shows your own name and address.

Words used here (4)
GilbApp
GilbApp is the app, opened in a web browser at https://gilb.com/app, where you open, fill and share your vaults.
sign-in code
A sign-in code is a 6-digit number GilbPlatform e-mails to you; typing it proves the address is yours and signs you in.
GilbPlatform
GilbPlatform is the service that keeps people's and organisations' data in vaults, each at its own web address.
vault name
A vault name is the short name your vault is known by on GilbPlatform: small letters and digits, the first part of its address.
Steps
  1. Search your mail for Your GilbApp sign-in code, in the junk or spam folder too.

    In your mail, search for the e-mail Your GilbApp sign-in code, and look in the junk or spam folder too. It goes to the address the card shows after Code sent to.

    More about this

    The e-mail shows the 6-digit code in large digits and says It expires in 10 minutes. A code found in the spam folder works the same. Its button Sign in to GilbApp signs you in without typing. Past a sending limit the card still shows Code sent to, but no e-mail is sent; the code you already have still works. If the address after Code sent to is wrong, or no e-mail came, go on with step 3.

  2. If the card says the code did not work, type the 6 digits again in 6-digit code.

    If the card says "That code did not work. Codes are single-use and expire after 10 minutes — request a new one.", check the 6 digits in the newest e-mail and type them again in the box that shows 6-digit code. At the sixth digit the card signs you in by itself.

    The GilbApp sign-in card after a wrong code, with the red line "That code did not work. Codes are single-use and expire after 10 minutes — request a new one." and the empty box that shows "6-digit code" outlined in orange.
    The GilbApp sign-in card after a wrong code, with the red line "That code did not work. Codes are single-use and expire after 10 minutes — request a new one." and the empty box that shows "6-digit code" outlined in orange.
    Show as text

    In the middle of the screen, the card shows "Code sent to" and your address near the top. Lower down, the wide box with the grey words "6-digit code" is empty again and outlined in orange, and a pink box under it says in red that the code did not work. Click the box and type the 6 digits from the newest e-mail.

    More about this

    A code that did not work was wrong, already used, or older than 10 minutes. A wrong code does not use the code up: you can type the right digits again. But 5 wrong codes, counted for your address as a whole and not for one code, end the code and lock the address. Only the code from the newest e-mail works. If it still does not work, go on with step 3.

  3. Press Change email.

    Press Change email beside your address, after Code sent to. The card goes back to the e-mail box with your address in it.

    The GilbApp sign-in card saying "Enter code from email." and "Code sent to" a made-up address, with the link "Change email" outlined in orange.
    The GilbApp sign-in card saying "Enter code from email." and "Code sent to" a made-up address, with the link "Change email" outlined in orange.
    Show as text

    Near the top of the card, the line "Code sent to" shows your address, and right after it the small link "Change email", outlined in orange. Check the address first. Press "Change email" to go back to the e-mail box, both when no code came and when the code does not work.

    More about this

    If the address has a typo, fix it in the box now. The card has no other button for a new code, so you need Change email both when no code came and when the code does not work.

  4. Press Send Code to Email.

    Press Send Code to Email. The card shows Code sent to and your address, and a new code comes by e-mail.

    The GilbApp sign-in card back on the e-mail step, with a made-up e-mail address still in the box and the button "Send Code to Email" outlined in orange.
    The GilbApp sign-in card back on the e-mail step, with a made-up e-mail address still in the box and the button "Send Code to Email" outlined in orange.
    Show as text

    The card is back at its first view, "Sign in to your account, or create a new account", with your e-mail address still in the box. Fix the address if it has a typo, then press the dark button "Send Code to Email" just under the box, outlined in orange.

    More about this

    You can ask for a new code 45 seconds after the last one, and at most 3 times in 10 minutes for one address; asking too soon or too often sends no e-mail, though the card still shows Code sent to. The button reads Sending a code… while it works. If the card says GilbPlatform refused the sign-in (HTTP 401). Wait a moment, then try again., the address is locked after 5 wrong codes, or has asked for too many codes or tries in a short time: wait 15 minutes, then try again. The same words with another number mean GilbPlatform turned the request down for another reason; wait a moment and try again.

  5. Type the new code in the box that shows 6-digit code.

    Open the newest e-mail Your GilbApp sign-in code and type its 6 digits in the box that shows 6-digit code. At the sixth digit GilbApp signs you in.

    The GilbApp sign-in card after a new code was sent, saying "Enter code from email." and "Code sent to" a made-up address, with the empty box that shows "6-digit code" outlined in orange.
    The GilbApp sign-in card after a new code was sent, saying "Enter code from email." and "Code sent to" a made-up address, with the empty box that shows "6-digit code" outlined in orange.
    Show as text

    The card says "Enter code from email." again. Under "Code sent to", your address and "Change email" is the wide box with the grey words "6-digit code", outlined in orange. Type the 6 digits from the newest e-mail; there is no button to press.

    More about this

    Only the code from the newest e-mail works now. The box takes digits only, so you can paste the code too. The card shows Signing in… and then opens GilbApp. For a new e-mail the card also shows Vault name above the code box: a name must be in it first, or the card says Choose a vault name first.

Deeper

Also asked:

The code does not work or has expired. A code works once, for 10 minutes, and only the newest one works. Press Change email, then Send Code to Email, and type the new code. After 5 wrong codes the address is locked for 15 minutes.

The e-mail with the code went to spam. A code found in the spam or junk folder works the same: type its 6 digits, or press Sign in to GilbApp in the e-mail. It must be the newest code, and less than 10 minutes old.

It says I tried too many codes. How long must I wait? 15 minutes: after 5 wrong codes the address is locked for 15 minutes. Then press Send Code to Email and type the new code.

A code works once, and for 10 minutes. Only the newest code you asked for works: asking again replaces the old one.

You can ask for a new code 45 seconds after the last one, and at most 3 times in 10 minutes for one address. From one network, at most 8 codes go out in 10 minutes, and 3 in 15 seconds. Past a limit the card still shows Code sent to, but no e-mail is sent; the code you already have still works. After you sign in, the count for your address starts again.

After 5 wrong codes the address is locked for 15 minutes, and longer each time it happens again, up to a day. The 5 wrong codes are counted for your address as a whole: asking for a new code does not start the count again. While it is locked, a correct code does not work either, and asking for a new one is refused or sends nothing.

The card remembers your address for 15 minutes: if you reload GilbApp, it comes back to the code box.

If you added a passkey (a sign-in kept on your device and unlocked the way you unlock the device), your browser may offer it when you click the e-mail box. Choose it, and GilbApp opens without a code.

The same code rules hold when you sign in with an e-mail code to an app built on GilbPlatform: a code works once and for 10 minutes, and after 5 wrong codes the address is locked for 15 minutes, and longer each time it happens again, up to a day. That app's own screen and e-mail may look different from GilbApp's.

If no code comes after you have waited and asked again, or the address stays locked, write to [email protected].

This answer is written for a computer screen. On a Mac the steps are the same in any browser; the key Enter is called Return there.

Source: GilbPlatform 670005cc (https://id.gilb.com/version read 12 November 2026): src/auth/email-otc.ts:64-71 (10-minute code; 5 wrong codes; 15-minute lock doubling, at most 24 hours); src/auth/send-guard.ts:34-65 (10-minute window; 15-second burst; 3 per address; 45 seconds between codes; 8 per network; 3 per burst); src/auth/send-otc-email.ts:210-222 (subject Your <app> sign-in code; It expires in 10 minutes.; Or paste the code above if the button does not work.). Sign-in card gilb-signin 0.12.3 (GilbApp 96968de7 package-lock.json:83-84; gilb-signin c548c79): src/SignInCard.tsx:274 ([email protected]), :296 (Send Code to Email, Sending a code…), :306 (Code sent to), :322 (Change email), :366 (6-digit code), :377 (Signing in…); src/pendingSignInEmail.ts:1 (the address is kept 15 minutes); src/types.ts:57 ("That code did not work. Codes are single-use and expire after 10 minutes — request a new one."), :73 (<app> refused the sign-in (HTTP <status>). Wait a moment, then try again.). Sentences reused word for word from the live answers How do I sign in with the e-mail code?, How do I sign in to GilbApp? (passkey) and How safe is signing in with an e-mail code?. GilbPlatform 0fc5a548 (https://id.gilb.com/version, read 13 November 2026): src/auth/email-otc.ts:64-72 (code 10 minutes, single use, 5 wrong codes, 15-minute lock doubling up to a day), one code path for every app (src/routes/email-auth.ts verify-code).

Checked against GilbApp d529620.